A high-speed continuous feeder, twenty inches wide by seventeen long. Wide-format feeders used to be too costly, too cumbersome and too complicated. The R-20 runs the large documents, still handles the small stuff, and is compact enough to move from one job in your plant to the next.
Down to 2 in. wide with the card kit · 23 × 17 in. footprint · 45 lb
Separator and buckle gap
On its adjustable floor stand
Running a box, bag or big envelope
Heavy-duty design with lightweight versatility. Run the large documents, then switch to small media without buying a second feeder.
The piece meets the separator and buckles instead of getting pinched between two rollers. One leaves the stack, the one under it stays where it is — which is why uneven, glossy and stuffed work runs off the same pile as everything else.
On a wide piece a nip point does not just double — it skews, because the pinch is never even across twenty inches. Buckling against a fixed separator keeps the leading edge square.
Four add-ons from the R-20’s own list. Leave off the ones the job does not need.
The adjustable-height SS2420 stand, set to the height of the equipment it feeds.
For running it on a bench, and moving it between jobs.
Takes the R-20 down to 2 in. wide for small media, without giving up the big pieces.
Feed one piece at a time, or run to a count and stop on the number.
Against the other two, by the width of the piece you are feeding.
Box it up and mail it to St. Louis. We will run it on the R-20, film it, and tell you straight whether this is the machine for it.
