All feeders SA-5 · ATTACHING

The SA-5

A servo attaching feeder. It places cards onto work as it passes on your line, one card or two at a time or counted out in batches, set from the touchscreen and keyed to your line through its own sensor and encoder inputs.

Drive
Servo
Modes
Single, dual, batch
Set from
Touchscreen
Line inputs
Sensors, encoder

Specs on request · tell us about your line and we will walk you through the setup

Ask about the SA-5 Send us a sample
SA-5 The SA-5 servo attaching feeder with its touchscreen, over the line it feeds
Servo attaching

Cards onto the piece, in time with the line

The SA-5 takes cards off a stack and places them onto work moving past on your line. A servo drives the feed, and an encoder input lets it follow the speed your line is actually running.

  • Single card, dual card and batch count modes, chosen on the touchscreen
  • Manual mode for feeding one card at a time from the screen
  • Start and stop sensor inputs, an encoder input and a miss output on the control box
  • Buckle Separation™, like every Straight Shooter feeder
The SA-5 hopper loaded with a stack of cards

The hopper, loaded with cards

Close-up of the SA-5 separator over the feed rollers

Separator

The SA-5 touchscreen showing single card, dual card and batch count modes

Single card, dual card, batch count

The SA-5 control box with start sensor, stop sensor, encoder and miss output connections

Start, stop, encoder, miss output

Tell us what you are attaching.

Send us the card and the piece it goes on. We will tell you straight whether the SA-5 is the machine for it.

Ask about the SA-5 Send us a sample
SA-5 · discharge The SA-5 feed head seen from the discharge end
Straight Shooter — big, medium, small Configure a feeder Send us a sample